Back Plate Deburring Machine
Application:
Improving braking effect: The burrs between the friction lining and the back plate can affect the close contact between this two parts, reducing braking effect. Removing the burrs can ensure a complete fit between the friction lining and the back plate, improving braking effect.
Avoiding brake noise: Burrs between the friction lining and the back plate can increase friction during movement, causing brake noise. Removing burrs can reduce friction during braking and reduce braking noise.
Extending the service life of brake pads: Burrs between the friction lining and the back plate will accelerate the wear of the brake pads and shorten their service life. Removing burrs can reduce the wear of brake pads and backing plates, and extend the service life of brake pads.
Our advantages:
High efficiency: The machine can continuously remove the burrs by line-flow working mode, each hour process about 4500 pcs back plate.
Easy operation: It has low skill requirements for workers, just need one worker feed back plates in at one end of machine. Even worker with no experience can operate it. In addition, the machine has 4 working stations, and each station controlled by a motor, 4 stations switch is individual, you can start all stations together, or choose some of stations to work.
Long service life: The machine has 4 working stations, the brush on each working stations can be replaced.
Safety prevention: The sparks will appear when back plate contact with the brush, it’s a normal phenomenon because they are both metal material. Each stations installed a protect shell to isolate the sparks.